Quiz · Engineering & Inventions

Engineering quiz

Ten engineering questions with the answer and a short explanation after each one. The questions come from the Engineering & Inventions lessons in Generalist.

10 questions from a pool of 112 · no sign-up

  1. By 1914, after Ford started its moving assembly line, about how long did it take to put together one Model T?

    Correct.Not quite. The answer is About an hour and a half.

    It took 93 minutes, down from 12.5 hours. The lesson shows how factories turned the car into something millions could buy.

    From the lesson "From one three-wheeler to 1.6 billion cars" in How a car works.

  2. Counting every separate way each joint can turn, how many movements does a human arm have from shoulder to wrist?

    Correct.Not quite. The answer is Seven.

    Your arm has seven. Robot arms are designed around the same count, and this lesson shows why six is the number that matters.

    From the lesson "How a robot arm knows where its own hand is" in How robots work.

  3. When pilots say a plane's wing has stalled, what has stopped working?

    Correct.Not quite. The answer is Smooth air over the wing.

    The smooth airflow over the wing. A stall has nothing to do with the engines, and the lesson shows what makes the airflow break away.

    From the lesson "What happens when a wing stalls, and how flaps help" in How airplanes fly.

  4. An average American coal power station in 2025 burned fuel holding 100 units of energy. About how many units left the plant as electricity?

    Correct.Not quite. The answer is About 32.

    About 32. The other two-thirds left as heat. The lesson shows why a steam plant can't avoid that, and how some gas plants claw part of it back.

    From the lesson "Why power stations throw away most of their heat" in How electricity is generated.

  5. An arch bridge made of brick, which pulls apart easily, can carry a road. What does the brick do under the load?

    Correct.Not quite. The answer is It is squeezed along the curve.

    The brick is squeezed, with each piece pressing on the next along the curve. This lesson shows why that works and what an arch needs at its ends.

    From the lesson "Why can a curve carry a road?" in How bridges carry a load.

  6. A heater is asked for a big temperature jump and runs at full power. The controller keeps adding up the gap meanwhile. What happens when the room reaches the target?

    Correct.Not quite. The answer is The room overshoots the target.

    The room overshoots. The stored total keeps the heater on after the target is reached, and this lesson shows that no gain setting fixes it.

    From the lesson "The failures tuning can't fix" in Why automatic controllers overshoot and oscillate.

  7. A solid steel bar and a hollow steel tube have the same length and use the same amount of steel. Which carries more load before it buckles?

    Correct.Not quite. The answer is The hollow tube.

    The hollow tube carries more. This lesson shows what sets a column's buckling load, and why spreading material outward helps.

    From the lesson "What decides when a column buckles" in Why a strong column still folds.

  8. In Dubai's summer, builders of the Burj Khalifa added something to their concrete before pouring it. What was it?

    Correct.Not quite. The answer is Ice.

    They added ice and poured at night to keep the concrete cool. The lesson shows why that mattered, and how materials reached the top.

    From the lesson "How you build a tower half a mile high" in Skyscrapers.

  9. A beam's steel is pulled tight before the concrete is poured around it. After the concrete hardens, the steel is let go. What is the concrete left with?

    Correct.Not quite. The answer is A built-in squeeze.

    The steel tries to spring back, which leaves the concrete under a built-in squeeze. This lesson is about that and about how beams are designed to fail.

    From the lesson "Why a beam with less steel is the safer one" in Reinforced concrete and the steel hidden inside it.

  10. If a car goes twice as fast, how much more motion energy do its brakes have to get rid of to stop it?

    Correct.Not quite. The answer is About four times as much.

    Motion energy grows with the square of speed, so doubling speed means four times the energy. The lesson shows where brakes put it.

    From the lesson "How a car steers, soaks up bumps and stops" in How a car works.

Learn the answers

Each question belongs to a topic you can read here. Start with the engineering & inventions topics, or try another quiz.

Common questions

Where do the questions come from?

Every question opens a lesson in the Generalist app's Engineering & Inventions subject. Each one is written to make you curious about the lesson, and the explanation that follows is based on the sources listed on the topic page.

Is this quiz hard?

Harder than most trivia. The questions ask how and why things work, so a wrong first guess is common. The explanation appears as soon as you choose an answer, and you can read the full first lesson of each topic on this site.

Can I get new questions?

Yes. Choose "Try ten new questions" under the quiz to draw another set. The Generalist app adds questions to every lesson and brings back the ones you studied in later review sessions.