Engineering & Inventions · Materials & manufacturing

Plastics

Plastics are long chain molecules that can be shaped into almost anything. See what the main kinds are, how a pellet becomes a bottle or a pipe, and why the durability that makes plastic useful is also the problem.

4 short lessons · about 16 minutes · 10 sources · updated November 2026

What you will learn

  • Explain what a polymer is and how the shape of its chains changes a plastic's properties
  • Tell thermoplastics from thermosets by what happens when they're heated
  • Describe how injection molding, blow molding and extrusion shape melted plastic
  • Explain why mold-based plastic production only pays off at high volumes

Lesson 1 of 4 · 4 min

What plastic is made of

Before you readA floppy carrier bag and a stiff water pipe can both be made of polyethylene. What mainly makes them behave so differently?

Correct.Not quite. The answer is The shape of their molecules.

It's the shape of the chains, branched or straight. The lesson shows why that changes so much.

The word polymer means "of many parts." A polymer is one very large molecule built from a small molecule, the monomer, joined to itself over and over into a chain.

Polyethylene, the most-made plastic, is the simple case. Its monomer is ethylene, a small molecule of carbon and hydrogen. Link a great many together and you get the stuff of bags, films and bottles. Over 100 million tonnes of it were being made each year by 2017.

The chains in a plastic lie tangled together, held by weak pulls between neighbors. How tightly they pack decides how strong the plastic feels.

In low-density polyethylene, the chains sprout lots of side branches. The branches keep chains apart, so the pull between them is weak. The plastic stretches and flops, which is why its most common use is bags.

In high-density polyethylene, the chains are mostly straight. They lie close together like uncooked spaghetti in a box, so the plastic is stronger and harder. That's the stuff of milk jugs and water pipes.

Check yourselfWhy is high-density polyethylene stiffer than low-density polyethylene?

Correct.Not quite. The answer is Its straighter chains pack closer.

Both are made from ethylene. The straight chains of high-density polyethylene pack tightly, while branches push chains apart and make the plastic floppier.

Heat a thermoplastic and the pull between its chains weakens, so it softens into a thick liquid. Cool it and it hardens again. You can do this over and over, which is why factories buy these plastics as pellets to melt and shape.

A thermoset starts soft or liquid and then cures. Curing builds chemical bonds between neighboring chains, called cross-links, until the whole piece is one connected network. Heat it later and it won't melt. It scorches and breaks down instead.

Try to recallWhy can a thermoplastic be melted and reshaped while a thermoset can't?

In a thermoplastic the chains are held only by weak pulls that loosen with heat, so they slide apart and the plastic flows. In a thermoset, curing ties the chains together with cross-links into one network. Heat can't undo those bonds, so the plastic breaks down instead of melting.

A plastic is long chains of one repeated unit. How the chains branch and pack sets how stiff it is, and whether they're cross-linked decides if it can ever melt again.

Lessons in this topic

  1. What plastic is made of

    See how a plastic is one small molecule repeated into a long chain, why chain shape makes a bag floppy and a pipe stiff, and why some plastics remelt and others never do.

    Essentials · 4 min

  2. How a pellet becomes a bottle, a cap or a pipe

    Follow melted plastic through injection molding, blow molding and extrusion, and see why a costly mold only pays off by the thousand.

    Essentials · 4 min

  3. From billiard balls to nylon stockings

    How plastic began as a stand-in for ivory, became fully synthetic with Bakelite, and grew into a giant industry through World War II.

    Deeper · 4 min

  4. Where plastic goes when you're done with it

    What the number on a plastic tub really means, why most plastic is never recycled, and what's known about microplastics and plant-based plastics.

    Deeper · 4 min

Three quick stories from this topic

Only 9% recycled

Of all the plastic thrown away up to 2015, only about 9% had ever been recycled

Another 12% had been burned. The other 79%, billions of tonnes, sat in landfills or the natural environment, because none of the common plastics are broken down by microbes.

Recycled once

Melting plastic to recycle it can break down its chains. Only about 1% of plastic has been recycled more than once.

The number on the tub

The resin code in a triangle names the kind of plastic. It doesn't mean the item will be recycled.

64 million pairs

Nylon stockings sold 64 million pairs in their first year on the market

They went on sale in 1940, five years after Wallace Carothers first made nylon at DuPont as a synthetic silk. Within a couple of years nearly all nylon was going to the military instead.

Off to war

During World War II almost all nylon production went into parachutes, ropes and other military gear.

The industry grew

US plastic production rose 300% during the war, and the factories turned to everyday goods afterwards.

Bag and jug, one plastic

A floppy carrier bag and a stiff milk jug can be made of the same plastic

Both are polyethylene. In the bag the chains are heavily branched, so they can't pack tightly. In the jug they're mostly straight and pack close, which makes the plastic stronger and harder.

One building block

Polyethylene is ethylene joined to itself over and over. It's the most-made plastic in the world.

Why packing matters

Plastic chains are held together by weak pulls. The closer they lie, the stronger those pulls add up.

Sources

  • Why engineers choose one material over another

    How stiffness, strength, toughness, mass and shape make a material right for one job and a poor choice for another.

    4 lessons · 15 min

  • Reinforced concrete and the steel hidden inside it

    Concrete cracks when it's pulled, and a little steel in the right place fixes that. See why the two materials work together, how a beam is made to sag before it fails, and what rust does in the end.

    4 lessons · 23 min

  • Iron and steel

    Steel is iron with a small, controlled amount of carbon. See how a blast furnace turns ore into iron, how the Bessemer converter made steel cheap, and why steelmaking is now one of the hardest industries to clean up.

    4 lessons · 16 min

  • How bridges carry a load

    Trace weight through beams, arches, cables and supports, and see why shape matters as much as material.

    4 lessons · 15 min

  • How buildings stand up

    Every building has to carry its own weight, its contents and the wind down to the ground. Follow those loads through floors, beams, columns and foundations, and see what the soil underneath has to do.

    4 lessons · 16 min

  • Simple machines and mechanical advantage

    Levers, pulleys, ramps, wedges, screws and wheels all trade distance for force. See how each does it, why none saves any work, and how to find them inside a bicycle or a crane.

    4 lessons · 16 min

All engineering & inventions topics · Take the quiz