Guided path · Engineering & Inventions

Measure, design and learn from failure

Go from sensors and feedback control to the practical limits of materials, bridges and machines, then learn from a bridge that failed.

7 topics · about 115 minutes in total

  1. How a sensor turns temperature into a number

    Start with measurement. A bead whose resistance changes with heat becomes the digits on a display.

    4 lessons · 22 min

  2. How feedback keeps a machine on target

    A reading is useful when something acts on it. Cruise control measures the gap to its target speed and corrects it.

    4 lessons · 15 min

  3. Why engineers choose one material over another

    Machines have to be made of something. Weigh stiffness, strength and toughness when choosing a material.

    4 lessons · 15 min

  4. How bridges carry a load

    Shape matters as much as material. Trace weight through a bridge's beams, arches, cables and supports.

    4 lessons · 15 min

  5. How a heat pump moves heat

    Switch from carrying loads to moving energy, with a machine that warms a house using heat taken from freezing outdoor air.

    4 lessons · 16 min

  6. How an aircraft stays controllable

    A heat pump sends refrigerant around a closed loop. An aircraft works on the open air, steering with small hinged surfaces about three axes.

    4 lessons · 16 min

  7. The Tacoma Narrows collapse and what it taught

    Air can also destroy. Finish with the Tacoma Narrows Bridge, which twisted itself apart in a 42 mph wind in 1940, and what the failure taught designers.

    4 lessons · 15 min

More guided paths