Science · Forces, energy & matter
Why things float or sink
Trace the upward push of water to pressure and to the water an object shoves aside. Then predict what cargo, a hull's shape and salt water do to a floating object.

What you will learn
- Explain where buoyancy comes from in a fluid at rest.
- Compare buoyancy with weight to predict which way an object starts to move.
- Relate buoyancy to the weight of the fluid an object displaces.
- Explain how overall density and a watertight shape let a metal vessel float.
Lesson 1 of 4 · 3 min
Why does water push upward?
Push an empty, closed bottle underwater and it pushes back. Let go and it pops up to the surface. Where does that upward push come from?
Water presses on every surface of the bottle, the top as well as the bottom. In still water, pressure increases with depth. So the bottom of the bottle gets a harder push than the top, and that difference is a net push upward.
Pressure is force per unit area, how hard something presses on each patch of a surface. Deeper water has more water above it to hold up, so it presses harder. It adds up fast. Just 10.3 meters of water presses as hard as the whole atmosphere above it.
Around an immersed object, all these pressure forces add up to one net upward force, called buoyancy. The same thing happens in other liquids, and in gases such as air. A helium balloon tugging on its string is buoyancy at work in air.
Buoyancy acts on a stone too. Sinking doesn't mean the water has stopped pushing up. Hold a stone underwater and it pulls down on your hand less than it does in air, because the water carries part of its weight. A ship's anchor lying on the seabed is partly held up the same way.
So buoyancy is there either way. Whether an object rises or sinks depends on how the two forces compare, buoyancy pushing up and weight pulling down.
Picture letting go of an object underwater, from rest, well clear of the bottom. If buoyancy is greater than its weight, it starts to accelerate, or pick up speed, upward. If its weight is greater, it starts to accelerate downward.
If the two forces are exactly equal, the object stays where you left it. Scuba divers aim for that state so they can hover at one depth.
A bottle floating freely settles with only part of its volume underwater. At rest, the upward buoyancy balances its downward weight.
Add a load and more of the bottle goes under. Its underside is now deeper, where the water presses harder, so the upward push grows. The bottle settles again once the push matches the new weight. Load it past what the water can match and it sinks.
Lessons in this topic
Why does water push upward?
See how water pressure, which grows with depth, pushes up on everything in the water, including the things that sink.
Why a steel ship floats and a steel bar sinks
Use Archimedes' principle to work out how low a loaded boat sits, and see how a hollow hull lets steel carry many times its own weight.
Why does the same boat sit higher in salt water?
See why a ship rides higher at sea than in a river, then tell the changes that add weight from the ones that add buoyancy.
How much of an iceberg is underwater?
Turn two densities into the fraction of a floating object that sits below the surface, then see how a hydrometer uses the same ratio to test a fluid.
Three quick stories from this topic
Ten meters of water
Ten meters of water presses as hard as the entire atmosphere above it
The air overhead reaches up about 120 kilometers, and at sea level its weight presses with one atmosphere of pressure. Water is about 775 times as dense as air, so 10.3 meters of it adds the same again. A diver at that depth feels two atmospheres.
Pressure grows with depth
Deeper water has more water above it to hold up, so it presses harder. The pressure rises in step with the depth.
That's where buoyancy comes from
The underside of an object in water sits deeper than its top, so it gets the harder push. The difference is a net upward force.
The anchor's lost eighth
Water holds up about an eighth of a sunken steel anchor's weight
Water pushes up on everything in it, sinking or floating. The push equals the weight of the water the object shoves aside, and steel is about 7.8 times as dense as water. The anchor sinks because the other seven eighths of its weight win.
Two forces compete
Feeling lighter underwater doesn't mean gravity has switched off. The water around you is supporting part of the load.
Floating adds a balance
An object floating freely at rest displaces fluid that weighs as much as it does. Sinking and floating follow the same principle.
The fresh water line
Cargo ships carry a separate loading line for fresh water because they float deeper in it
Seawater is about 2.5% denser than fresh water, so a ship has to sink a little farther in a river to push aside the same weight of water. A ship loaded to its fresh water line rises to its sea line when it reaches the ocean.
The weight to push aside stays the same
A floating ship displaces water that weighs as much as the ship and its cargo. Denser water packs that weight into a smaller volume, so less of the hull goes under.
Samuel Plimsoll's mark
The loading mark was invented in 1876 by Samuel Plimsoll. Marks for different water densities were added to it later.
Sources
- Variation of pressure with depth in a fluid, OpenStax, College Physics 2e
- Archimedes' principle, OpenStax, College Physics 2e
- Load line (watercraft), Wikimedia Foundation





