Everyday Systems · Homes & utilities

Where tap water comes from and where it goes

Follow water to your tap and away down the drain. See why protecting the source, treating drinking water and treating sewage are different jobs.

4 short lessons · about 17 minutes · 8 sources · updated November 2026

What you will learn

  • Identify source water and tell it apart from a distribution system
  • Explain why drinking-water protection uses several barriers
  • Tell screening and settling apart from biological wastewater treatment
  • Explain why treated wastewater isn't automatically drinking water

Lesson 1 of 4 · 4 min

How water reaches your tap and what protects it

Before you readWater for nearly nine million New Yorkers travels up to 125 miles from reservoirs upstate. What share of it reaches homes by gravity alone?

Correct.Not quite. The answer is 97%.

Aqueducts carry it, and 97% needs no pumping. This lesson follows water from its source to the tap and the barriers that protect it on the way.

Turn on a tap in New York City and the water may have come 125 miles. It starts in 19 reservoirs and three lakes in the Hudson Valley and the Catskill Mountains. About 1.3 billion gallons a day flow to nearly nine million people.

Almost none of it is pumped. Aqueducts carry it to the city, and 97% reaches homes and businesses by gravity alone.

Water at that first stage, before any treatment, is called source water. A supply can also start in a river, a spring or groundwater, the water below the land surface.

Source, treatment and delivery are separate stages. In New York, aqueducts and tunnels bring the water from the reservoirs to the city. There a network of water mains, the distribution system, carries it to buildings, and the plumbing inside each building is the last stretch.

The city tests the water hundreds of times a day, from the reservoirs to about 1,000 sampling stations on its streets.

Check yourselfA town draws water from a reservoir, treats it and pipes it to homes. Which part of that system is the source?

Correct.Not quite. The answer is The reservoir supplying water for treatment.

Source water is what the town draws before treatment, so in this case it's the reservoir. Treatment changes water quality, and the pipes and taps belong to distribution, which carries water toward users. The stages are connected, but they aren't interchangeable.

Why go so far for water? In 1832, contaminated water contributed to a cholera epidemic that killed 3,500 people in the city. By 1842 an aqueduct was carrying clean water 41 miles from the Croton River.

A clean source is the first barrier in what the US Environmental Protection Agency, the EPA, calls a multi-barrier approach. Choose a good source and protect it, treat the water, then guard it in the pipes. Each barrier deals with risks at a different point, and a cleaner source leaves less work for treatment.

Follow the barriers through the system. Upstream, work such as stabilizing stream banks keeps sediment out of the water. Treatment is chosen to suit the water and what's in it.

After treatment, New York keeps a little chlorine in the water, a chlorine residual, to stop microbes growing in the pipes.

The last barrier works inside your building. New York's water is virtually lead-free when it leaves the reservoirs. Lead gets in at the very end, from solder, fixtures and pipes in some buildings. So the city adjusts the water's pH and adds orthophosphate, a common food additive that forms a protective coating inside plumbing.

Try to recallA friend says a town can ignore pollution near its water source because it has a treatment plant. What's missing from that reasoning?

Protecting the source reduces contamination before treatment, and treatment has to match the actual water and contaminants. Water quality also needs protecting during distribution, so the plant is only one part of a longer system.

So the water in your glass has been protected three times, at the source, in treatment and in the pipes, right down to a coating inside your building's plumbing. For your own supply, local water-quality reports say which barriers are in place.

Lessons in this topic

  1. How water reaches your tap and what protects it

    Follow New York City's water 125 miles from reservoir to tap, and see why it's protected at the source, in treatment and in the pipes.

    Essentials · 4 min

  2. What happens to water after it goes down the drain

    Follow wastewater through a treatment plant, where screens, hungry bacteria and disinfection each do a different job.

    Essentials · 4 min

  3. Where do the removed pollutants go?

    Follow what activated carbon, reverse osmosis and bacteria take out of water, and find out where it ends up.

    Deeper · 4 min

  4. When rain and sewage share a pipe

    Tell combined sewers from separate ones, then see why storms cause untreated overflows and how communities cut them back.

    Deeper · 5 min

Three quick stories from this topic

Sewers built to overflow

In about 700 US communities, heavy rain can send untreated sewage into local waters

Their sewers carry rainwater and wastewater in the same pipes. In dry weather it all reaches the treatment plant. A storm can overwhelm the pipes, so the systems have permitted relief outlets that release the excess into nearby water.

How the two designs differ

In dry weather, a combined sewer carries everything to the treatment plant. Most US communities now use separate systems, with sewage in one set of pipes and stormwater in another, so a storm is less likely to push sewage past the plant.

Reducing overflows

Green infrastructure such as permeable pavement and rain gardens keeps stormwater out of the pipes, and real-time notification systems warn the public during a discharge. The Clean Water Act requires communities with overflows to put controls in place.

New York's water runs downhill

New York City's water travels up to 125 miles, and 97% of it arrives by gravity alone

The city draws about 1.3 billion gallons a day from 19 reservoirs and three lakes in the Hudson Valley and the Catskill Mountains. Aqueducts carry it to the city, and only 3% has to be pumped to its final destination.

Built after a cholera epidemic

In 1832, contaminated water contributed to a cholera epidemic that killed 3,500 people. Ten years later, on July 4, 1842, water from the Croton River reached the city through a 41-mile aqueduct.

Protected at three points

The water is guarded at the source, in treatment and in the pipes, where a little chlorine stays in it to stop microbes growing.

Bacteria clean the sewage

At a sewage plant, bacteria can remove up to 90% of the organic waste in the water

Screens and settling tanks only catch what's big or heavy. The dissolved waste goes to tanks of bacteria, with air mixed in because they need oxygen. The bacteria multiply, sink out as sludge, and some are sent back to eat the next batch.

Screens do a different job

Screens remove large objects, and settling separates out some suspended solids. These physical steps can't replace every change that biological treatment brings.

The microbes also need managing

As the microbes grow, they create material that has to be separated and handled. So a treatment plant produces residual solids as well as treated water.

Sources

This topic is part of Follow the systems around you, a guided path through related topics.

  • How a home gains and loses heat

    Tell conduction, convection and radiation apart, then use them to explain a cold floor, a drafty room, a leaky house and a glowing stove element.

    4 lessons · 22 min

  • Electricity in the home

    Follow electricity from the street through the meter and breaker panel to a socket. See why a home is split into circuits, which device catches which fault and why plugs and voltages differ between countries.

    4 lessons · 16 min

  • How homes are heated

    Boilers, furnaces, heat pumps, radiators, heated floors and city-wide heat pipes all warm rooms in different ways. See how each makes and moves heat, and what a thermostat really controls.

    4 lessons · 20 min

  • Football (soccer)

    Two teams, one ball and almost no hands. Learn the rules that matter, including offside, see how formations and pressing shape a match and how leagues, cups and the World Cup fit together.

    4 lessons · 16 min

  • How a card payment works

    Tap a card and four parties and a card network settle up behind the terminal. See who approves the sale, when the money really moves, who pays the fees and how chips and phones cut fraud.

    4 lessons · 16 min

  • Scoring systems and the strategies they reward

    Change a scoring rule and the best choice changes with it. See why soccer made a win worth three points, how a tennis player can lose with more points, and when the risky shot is the right one.

    4 lessons · 17 min

All everyday systems topics · Take the quiz