Politics & Law · Elections & civic participation

How voting systems turn votes into seats

See how first past the post, party lists and ranked ballots turn the same votes into different seats, with made-up districts and real results from the UK and Australia.

4 short lessons · about 22 minutes · 2 sources · updated November 2026

What you will learn

  • Identify the winner of a single-member plurality contest.
  • Distinguish a plurality of votes from an absolute majority.
  • Work out how small a winning share can be, given how many candidates are standing.
  • Calculate how winning district after district can give a party a bigger share of seats than of votes.
  • Explain the aim of proportional representation using an exact whole-seat example.
  • Show that the seat result depends on how voters are grouped into districts, as well as on the rule.

Lesson 1 of 4 · 5 min

Winning without most of the votes

Before you readIn 2015 a candidate won a UK parliamentary seat with 9,560 votes, and no rule was broken. What share of the vote was that?

Correct.Not quite. The answer is 24.5%.

It was 24.5%, so about three in four voters had picked someone else. This lesson shows how that can happen under a plurality rule.

In 2015 a candidate won the UK parliamentary seat of Belfast South with 9,560 votes. That was 24.5% of the total, so about three in four voters had picked someone else. No rule was broken.

A smaller case shows why. Say a district has one seat and three candidates. A gets 40 votes, B gets 35 and C gets 25. Under a single-member plurality rule, whoever has the most votes wins, so A takes the seat. Nothing requires A to beat the other two combined.

This rule is often called first past the post. It elects the UK's House of Commons, and it's used in the United States, Canada and India. Most countries use proportional systems. First past the post still reaches a huge number of voters, because India alone has more than 800 million.

The name suggests a finishing line that candidates must cross. There isn't one. What decides the seat is how each total compares with the others.

A has a plurality, meaning the largest individual share. An absolute majority means more than half. With 100 votes cast, 40 is a plurality but not an absolute majority.

And the 60 votes for B and C don't count as support for either of them. They aren't a single block that could be handed to one candidate.

Check yourselfIn a one-seat election decided by single-member plurality, A gets 40 votes, B 35, and C 25. Who wins the seat?

Correct.Not quite. The answer is A, because 40 is the largest individual total of the three candidates.

The plurality rule compares each candidate's own total, and 40 is the largest. Votes for B and C aren't pooled into a block against A. The rule doesn't require more than half, so there's no runoff and no empty seat.

The difference changes what you can say about the result. "A won under the counting rule" is supported. "Most voters chose A" isn't.

You also can't say every B voter preferred C to A, because each ballot recorded only one choice. What a result can tell you depends on the voting rule and on the information the ballot collects.

Try to recallIn a one-seat plurality election with 100 valid votes, A gets 40, B gets 35, and C gets 25. A wins. Why is "most voters chose A" still inaccurate?

Only 40 of 100 voters chose A. That's the largest individual share, which makes it a plurality, but an absolute majority needs more than half.

If the winner only needs the largest total, the number of candidates sets how small that total can be. Split 100 votes among three candidates as evenly as possible and the leader still has about 34, so a third of the votes can take the seat. Split them among five and the leader can win with about 21. The more candidates there are, the smaller the share that can finish first.

A winning share has no floor, because adding candidates keeps pushing the possible minimum down toward nothing. But it does have a level that always wins. Under this rule, more than half the votes can't be beaten, because then no rival can have a larger total. Anywhere between nothing and half, the result depends on how the rest of the field divides.

Real contests rarely split evenly, but crowded ones come close. The more candidates with a real chance, the fewer votes the winner needs. That's how 24.5% took Belfast South.

A candidate who wins with a small share may still be the one most voters would have preferred. Single-choice ballots don't record that. So a winning share only means something once you know how many candidates it was measured against.

Check yourselfIn a one-seat plurality contest with five candidates and 100 valid votes, roughly what's the smallest share that could win the seat?

Correct.Not quite. The answer is Just over 20 votes, since five candidates can split them nearly evenly.

The rule asks only for the largest individual total, so the possible minimum falls as the field grows. With five candidates, the votes can divide into five shares of about 20, and the leader takes the seat with just over a fifth. More than half always wins, but the rule never requires it.

Lessons in this topic

  1. Winning without most of the votes

    In 2015 a UK seat was won with 24.5% of the vote. See how the plurality rule allows that, and what such a result does and doesn't tell you.

    Essentials · 5 min

  2. The same votes, different seats

    In 2024 Labour won 63% of UK seats with 34% of the vote. Ten made-up districts show how that happens, and how proportional rules and district lines change it.

    Essentials · 6 min

  3. Why proportional systems don't all work the same way

    See how the number of seats, a legal threshold and the kind of candidate list make one proportional system differ from another.

    Deeper · 6 min

  4. When second choices decide the seat

    Count the same ballots under the Alternative Vote, see how the first-round leader can lose, and follow an Australian candidate who won from third place.

    Deeper · 5 min

Three quick stories from this topic

Winning a seat from third place

An Australian candidate who placed third with 21% of first choices won his seat in 2010

Andrew Wilkie trailed two rivals in the division of Denison. Australia's ranked ballots moved votes from each eliminated candidate to the voter's next choice, and by the fourth count Wilkie had 51.21%.

How the count works

If nobody has more than half the first choices, the candidate with the fewest votes is excluded and those ballots move to each voter's next preference. This repeats until someone passes half.

The first-count leader lost

The candidate who led the first count with 35.79% finished on 48.79%. Under a most-votes-wins rule, the same first choices would have elected that candidate.

A seat won on 24.5%

In 2015 a candidate won the UK seat of Belfast South with 24.5% of the vote

That was 9,560 votes, a record low for a winner. First past the post sets no minimum. The seat goes to whoever has the most votes, and the more candidates with a real chance, the smaller the share that can finish first.

Most votes isn't more than half

A plurality is the largest share. A majority is more than half. First past the post asks only for the first.

No floor, one safe level

Adding candidates can push a winning share lower and lower. The only share that can never lose is more than half.

A third of the votes, most of the seats

In 2024 Labour won 63.2% of UK House of Commons seats with 33.7% of the vote

Each constituency gives its one seat to the local leader, however narrow the lead. Votes for losing candidates count for nothing anywhere else, so a party that finishes first in many places can take far more seats than its share of the vote.

A made-up version

Give party A 40% in each of ten districts, with B and C on 30% each. A wins all ten seats with 40% of the votes.

Most votes, fewer seats

In the UK elections of 1951 and 1974, the party with the most MPs wasn't the party that got the most votes.

Sources

This topic is part of Rules, power and rights, a guided path through related topics.

  • What petitions and citizens' initiatives can do

    Compare what signatures can win in the UK, Switzerland and the EU, from a government reply to a national vote, and weigh the case for citizens' initiatives.

    4 lessons · 21 min

  • Political parties

    Why almost every democracy runs on parties, what they do for voters and politicians, why some countries have two big parties and others ten, and why loyalty to them is fading.

    4 lessons · 16 min

  • How a fair election is run

    Follow an election from the voter roll to the posted result, and see what independent officials, the secret ballot, observers and audits each add to trust in the outcome.

    4 lessons · 16 min

  • Criminal cases and civil cases

    The state prosecutes crimes and punishes. Private parties sue each other for compensation. See how the two tracks differ, how one event can lead to both, and where the line blurs.

    4 lessons · 17 min

  • Freedom of speech and its limits

    Why free expression is protected, where the US, Europe and other legal systems draw the line on incitement and hate speech, and why they draw it in different places.

    4 lessons · 18 min

  • The United Nations

    Why the UN was built in 1945, how the General Assembly, Security Council and agencies split the work, why five countries hold a veto, and what the UN has achieved.

    4 lessons · 16 min

All politics & law topics · Take the quiz