Mathematics & Logic · Change & calculus

How calculus measures the area under a curve

Fill a curved region with thin rectangles, let them shrink, and you have an integral. Then see the theorem that replaces all that adding with one subtraction, because adding up and finding a rate undo each other.

4 short lessons · about 21 minutes · 5 sources · updated November 2026

A curved-topped region between two posts, split into five equal-width strips with small gaps, the middle strip in yellow.

What you will learn

  • Describe the method of exhaustion and how a region is partitioned to apply it
  • Compute left-endpoint and right-endpoint approximations and say why they differ
  • Trace how both endpoint approximations converge as the number of rectangles grows
  • State what a Riemann sum allows that the endpoint methods don't

Lesson 1 of 4 · 5 min

Measuring a curved area with rectangles

Before you readIn the 200s BC Archimedes found the exact area of a slice cut from a parabola. How did it compare with the area of a triangle he drew inside it?

Correct.Not quite. The answer is Four thirds the triangle's area.

The slice has four thirds the area of the triangle. This lesson shows how to measure a curved area by filling it with shapes you can calculate.

A rectangle's area is width times height. A region with a curved edge has no such formula. In the 200s BC, Archimedes found the exact area of a slice cut from a parabola anyway. It's four thirds the area of a triangle he drew inside it.

He got there by filling the slice with smaller and smaller shapes whose areas he could calculate, and adding them up. Each round of smaller shapes covers more of what was left uncovered, so the total creeps toward the true area. His approach is called the method of exhaustion.

The modern version always uses rectangles. Say you want the area under a curve between two points on the horizontal axis. Cut that stretch into strips of equal width, called subintervals, and stand a rectangle on each one.

Every rectangle now has the same width, so only one question is left. How tall should each one be?

Check yourselfIn the method of exhaustion, a curved region is filled with shapes whose areas are known. Why does using more, smaller shapes give a better estimate?

Correct.Not quite. The answer is Smaller shapes leave less of the region uncovered.

Each shape's area is known exactly, so there's no measurement error to cancel. The only error is the part left uncovered between the shapes and the curved edge. Smaller shapes fit into that gap, so their total gets closer to the true area.

The two obvious choices are the curve's height at the left end of each strip, or at the right end. These give the left-endpoint approximation and the right-endpoint approximation.

Take the curve x squared between 0 and 2, cut into 4 strips of width 0.5. The left-end heights are x squared at 0, 0.5, 1 and 1.5, which come to 0, 0.25, 1 and 2.25. Multiply each by 0.5 and add, and the left estimate is 1.75.

Use the right ends instead and the heights are 0.25, 1, 2.25 and 4, for a total of 3.75.

One region has given two answers, and neither is a mistake. This curve rises all the way, so each left end is the lowest point of its strip and each right end is the highest. The left estimate sits under the curve and the right one over it. So the true area is trapped between 1.75 and 3.75.

Try to recallFor an increasing function, why is the left-endpoint approximation below the true area and the right-endpoint approximation above it?

On a rising curve, the lowest point of each strip is at its left end and the highest is at its right end. A rectangle built on the left end is shorter than the curve above it, so the left sum underestimates the area. A rectangle built on the right end pokes above the curve, so the right sum overestimates it. Together they trap the true area, as 1.75 and 3.75 do for x squared between 0 and 2.

Four rectangles tell you the area under x squared from 0 to 2 lies between 1.75 and 3.75. The exact area is 8 over 3, about 2.67. Thinner rectangles close the gap, and the value they close in on is what mathematicians mean by the area.

Lessons in this topic

  1. Measuring a curved area with rectangles

    See how Archimedes' way of filling a curved region with simple shapes became the rectangle method, and why two rectangle estimates trap the true area between them.

    Essentials · 5 min

  2. How thinner rectangles pin down an exact area

    Watch a low estimate and a high estimate squeeze together as the rectangles multiply, and see why the value they close in on is used to define area.

    Essentials · 5 min

  3. Why area and rate of change undo each other

    Track the area under a curve as its right edge moves, and see that the area grows at a rate equal to the curve's height. That's the first half of the Fundamental Theorem of Calculus.

    Deeper · 6 min

  4. Finding an exact area with one subtraction

    The second part of the theorem turns an exact area into an antiderivative evaluated at two ends. See why the plus C drops out and why the answer can come out negative.

    Deeper · 5 min

Three quick stories from this topic

Archimedes and the parabola

Archimedes found the exact area inside a parabola over 1,800 years before calculus

In the 200s BC he proved that a slice cut from a parabola has four thirds the area of a triangle drawn inside it. He filled the slice with ever smaller triangles and added up their areas, which is the idea behind every integral.

The method of exhaustion

Fill an awkward region with shapes whose areas you know, then use smaller shapes to fill what's left. The total closes in on the true area.

Rectangles took over

Modern calculus fills the region with thin rectangles instead. The exact area is the value their total approaches as the rectangles multiply.

Area grows at the curve's height

The area under a continuous curve grows exactly as fast as the curve is tall

Slide the right edge of the region one tiny step and the area gains a sliver as tall as the curve at that spot. So the area's rate of growth equals the curve's height. That link is the first part of the Fundamental Theorem of Calculus.

What the theorem claims

If f is continuous, the derivative of F equals f of x. The rate at which accumulated area grows is exactly the height of the curve. So each operation undoes the other.

A guaranteed antiderivative

The theorem also guarantees that any continuous function has an antiderivative, which isn't obvious in advance and is what makes Part 2 usable.

The integral sign is an S

The integral sign is a stretched letter S, because an integral is a sum

Gottfried Leibniz first wrote it in a manuscript dated October 29, 1675, as shorthand for the Latin word summa. An integral adds up the areas of ever thinner rectangles under a curve, and the sign still says so.

What it adds up

Cut the region under a curve into thin strips, stand a rectangle on each and add their areas. The integral is the value that total approaches as the strips get thinner.

Leibniz's other marks

He introduced dx, dy and dy/dx in a manuscript of November 11, 1675. Calculus still uses his notation.

Sources

This topic is part of Where quick math intuition goes wrong, a guided path through related topics.

  • How calculus finds speed at a single instant

    Build a speedometer reading from average speeds over shorter and shorter intervals. See why the method never divides by zero, why a sharp corner breaks it, and how one rate predicts the next moment.

    4 lessons · 17 min

  • Limits

    A limit is the value something closes in on, whether or not it ever gets there. See how the idea answers Zeno's runner, why 0.999... is exactly 1, and how calculus finally got a solid footing.

    4 lessons · 16 min

  • Newton, Leibniz and the invention of calculus

    Two men built calculus independently in the late 1600s, and their followers fought over the credit for decades. See what each found, what thinkers in Greece and India had done before, and whose notation won.

    4 lessons · 16 min

  • When the average is the wrong summary

    When one number stands in for a whole set, which number you pick changes the story. Mean, median and mode tend to pull apart when the shape is lopsided.

    4 lessons · 20 min

  • If-then statements and the mistake of reversing them

    Learn the one way an if-then statement can be false, why reversing it makes a different claim, and what you commit to when you deny one.

    4 lessons · 20 min

  • What a function is, and why it can't always run backward

    A function is a rule that gives each input exactly one output. See why two inputs can share an output, where a formula stops applying, and why working back from an output can fail.

    4 lessons · 17 min

All mathematics & logic topics · Take the quiz